JB's wear

A slim-fit ladies' corporate pant in 350gsm classic Ponte — the fabric that holds a sharp line without feeling stiff. Viscose for comfort, polyester for wear, and 5% elastane for give. Two front mock pockets, two back welt pockets, and an elastic waistband that...

A 280gsm X-back hoodie in the NSW/QLD rail configuration, with cross-back reflective tape plus an additional row across the lower back. Kangaroo pocket and pen-insert sleeve pocket, with tape rated to 50 domestic washes. Certified Day and Night to AS/NZS 1906.4:2023 and AS 4602.1:2011...

The ladies' multi-pocket stretch twill pant in 280gsm peached cotton/elastane, soft to the hand and cut urban. Cargo and pen pockets with hook-and-pile on the right, cargo on the left, two back hip and two front slant pockets. Tested to AS 4399:2020 for UPF....

The ladies' cut, in 280gsm peached cotton/elastane twill with a notably softer handle. Cargo and pen pockets with hook-and-pile on the right, cargo on the left, two back hip and two front slant pockets. Two rows of JB's stretch reflective tape in biomotion configuration....

A ladies' puffer coat in soft-handle 100% nylon pongee, fully lined and padded through body, sleeves and hood. Higher neck collar for warmth, two zippered front pockets and a drop tail for coverage. Fit Urban fit Fabric 100% Nylon shell extra soft hand feel...

A fully quilted freezer jacket in 320gsm polyfill on a 20,000mm waterproof, seam-taped shell. The detachable hood is lined in heavy-duty shepherd fleece, and there are under-layer side pockets specifically for warming hands. Internal waist drawcord, left-side internal zip access, snap-flap lower pockets and...

The ladies' Atrax, built on the same dual-density nitrile rubber/PU sole rated to 300°C, with a YKK side zip and a 200J composite toe cap with TPU toe cover. Removable Rebound Foam insock, flex zone technology, and a spare set of pink laces in...

The ladies' multi-pocket stretch twill short in 280gsm peached cotton/elastane. Cargo and pen pockets with hook-and-pile on the right, cargo on the left, two back hip and two front slant pockets. Tested to AS 4399:2020 for UPF. Fit Urban fit Fabric 98% Cotton, 2%...

Classic everyday comfort Fabric 65% Polyester for durability, 35% cotton for comfort, 115gsm Features Original fit Straight hem with side splits - longer length Two piece collar & collar stand Reinforced chest pocket Individually packed with JB's logo bag with fit measurement guide Sizing...

Classic everyday comfort Fabric 65% Polyester for durability, 35% cotton for comfort, 115gsm Features Original fit Straight hem with side splits - longer length Two piece collar & collar stand Reinforced chest pocket Individually packed with JB's logo bag with fit measurement guide Sizing...

Three pairs of fully terry-knit ladies' work socks in a cotton-rich blend, packed together on a hanger. The full terry construction adds padding underfoot — the part of a work boot that usually gets ignored until it starts to hurt. Fabric 53% Cotton, 26%...

A 13-gauge polyester glove with a textured liner and a smooth nitrile palm coating. CAT II, certified to EN ISO 21420:2020 and EN 388:2016+A1:2018 at 4121X. Twelve pairs per inner bag. Fabric 13G Polyester glove with a textured liner and smooth Nitrile palm coating...

A 35cm chemical-resistant gauntlet on an 18-gauge nylon liner, with full smooth nitrile coating and a sandy nitrile palm. CAT III, certified to EN ISO 374-1:2016 Type A with permeation code AJKLOPT, and to EN ISO 374-5:2016 against micro-organisms. Also EN 388:2016+A1:2018 at 4121A,...

A 350gsm cotton duck canvas apron built for a working kitchen. Every pocket is rivet-reinforced at the stress points — a chest pen pocket on the left, a centre front pocket below — and the PU/polyester strap arrives separately bagged with its hook. A...

A browguard and visor giving 180-degree protection through a 2mm toric polycarbonate visor measuring 400 x 205mm. HDPE browguard with a click-and-pull ratchet and a foam-lined sweatband. Complies with AS/NZS 1337.1:2010 at extra high impact resistance, with splash resistance, certified by SAI Global SMK...

A Type 1 brim safety helmet certified to the current AS/NZS 1801:2024, by SAI SMK41726. ABS shell with six air vents, a comfortable webbing tape and ratchet harness, and a removable sweatband. The full brim gives sun and rain coverage a peaked helmet does...

An ultra-thick ladies' work sock knitted from 89% bamboo fibre with a little polyester and elastane. Extra-thick full terry throughout for padding through a long day on hard floors. Single hanger pack. Fabric 89% Bamboo fibre, 10% Polyester, 1% Elastane Features Extra thick full...

A detachable chin guard with adjustable 50cm polyester webbing and a PE guard, attaching to JB's 8S001 safety helmet. Helmet sold separately. Ten pieces per polybag. Fabric Adjustable polyester webbing tape with PE chin guard Features Strap length 50cm Easily attaches to JB’s safety...

A Type 1 safety helmet with a six-point push-lock harness and six air vents. ABS shell — strong without the weight — and a removable sweatband. Meets AS/NZS 1801:1997, certified by BSI BMP 820110. Five per pack, ten pieces per carton. Features Shell manufactured...

The Atrax zip boot on a dual-density nitrile rubber/PU sole rated to 300°C, with a YKK side zip for quick on and off. A 200J composite toe cap with TPU toe cover, flex zone technology and a removable Rebound Foam insock. Fuel and oil...